T.J. Assemblies Part Number's are formated as follows:
nnnnn-dd-mmm
nnnnn |
Base Part Number (4 or 5 digits) |
dd |
Dash Number (1 or 2 digits)
For terminated parts this is used to specify the pin positions. For slotted parts this is used to specify the slot positions
|
mmm |
Material Code (2 or 3 characters)
Used to specify the molding material used
|
Example: 1102-01-GFD
1102 |
Base Part Number |
01 |
"Dash One" -- in this case specifies all 8 pins.
Note that dash numbers are specific to a base part number and may have a different
meaning depending on the base part number.
|
GFD |
Material Code -- in this case specifies DuPont 70G33L material.
|
|